River Sand Making Crusher Machine

River Sand Making Crusher Machine

River Sand Making Crusher Machine

River Sand Making Crusher Machine operation method

When the River Sand Making Crusher Machine processes the stone, its failure is not only related to the quality of the equipment, but also has a great relationship with the operation. Generally speaking, if the operation is reasonable, the production can be reduced. Wear, then it can also reduce the occurrence of faults, here we are to introduce some specifications of the River Sand Making Crusher Machine when it is used.

1. After the River Sand Making Crusher Machine is in normal operation, the material can be put into the material, and when adding the material, it needs to be evenly added, and it cannot be added sideways. This can prevent the sudden change of load or the phenomenon of unilateral sudden increase, which is beneficial to Ensure the smooth running state of the River Sand Making Crusher Machine;

Second, under normal working conditions, the temperature rise of the bearing should not exceed 30 °C, generally its temperature should not exceed 70 °C, otherwise it should stop immediately, find out the reasons to eliminate, for the River Sand Making Crusher Machine, the bearing is A very core part, its damage will cause the production to stop, and the replacement requires a large cost, so it needs to be processed in time for its high temperature phenomenon;

Three. When the River Sand Making Crusher Machine is working, it needs to be regularly and quantitatively lubricated for its internal parts. When lubricating, it is necessary to pay attention to the type of lubricating oil and ensure the purity of the lubricating oil. Lubrication effect, in addition to the equipment to carry out anti-rust operation, reduce the aging caused by rust, etc., to ensure its service life;

Fourth, when the River Sand Making Crusher Machine stops, it is necessary to stop the work of the feeder first. After the material in the crushing chamber of the equipment is finished and discharged, the motor can be turned off. In this process, the order is immutable, otherwise At the next boot, you need to clear the material before you can start it, delaying the production schedule;

5. Any failure in the production of River Sand Making Crusher Machine needs to be dealt with in a timely manner. When it is used normally, it needs to be regularly inspected to check the wear of the equipment. For parts with severe wear, it needs to be replaced in time. This can reduce the occurrence of faults;

The article mainly introduces the operation method of River Sand Making Crusher Machine. It mainly analyzes the operation specifications of five aspects, including material feeding, maintenance, shutdown, etc., which have a very important impact on the work of the equipment, whether it is A device with good performance can only help it run smoothly if it is reasonably operated.

leave a comment